Navcom StarFire Satellite Change Rev.G Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Navcom StarFire Satellite Change Rev.G herunter. NavCom StarFire Satellite Change Rev.G User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12
Rev. G i Release - March 12
This guide is updated to reflect the software from NavCom which is related to the StarFire satellite and frequency
changes. The most recent version of software for both current and legacy NavCom products are as follows:
Discontinued Products Current Products
Out-dated Firmware: (As of March 1, 2012)
Dual Frequency –
NCT-2000D Based
Products including the
NCT-2030, RT-3010,
RT-3020, SF-2040,
and SF-2050
Dual Frequency –
NCT-2100D Based
Products including
the NCT-2030, RT-
3010, RT-3020,
SF-2040, and SF-
2050
Single Frequency
SF-2110 Family
Products
Multi-Frequency –
SF-3050 / Sapphire Family
Products
Multi-Frequency –
SF-3040
SLv3,2,9.Bin
LBMv3,8.hex
SLv5,1,13.Bin
LBMv3,8.hex
SF-2110_v2_2_8.s19 SPv2,2,9,0.s19
SP_PWRIO_v2,2,9.s19
StarUtil-3000_v1,1,6,2.exe
SPv2,1,7,0.s19
SP_PWRIO_v2,1,7.s19
StarUtil-3000_v1,1,6,2.exe
Update Firmware to the following versions:
SLv3,3,2.Bin
LBMv3,10.hex
SLv5,1,18.Bin
LBMv3,10.hex
SF-
2110_v2_2_12.s19
SPv3,0,12,0.s19
SP_PWRIO_v3,0,12.s19
StarUtil-3000_v1,2,16.exe
SPv3,0,12,0.s19
SP_PWRIO_v3,0,12.s19
StarUtil-3000_v1,2,16.exe
*LAND-PAK requires
FieldGenius v6.0 or higher
to be compatible
Please contact your NavCom Dealer or NavCom Customer Support to obtain a copy of the latest software. As
always, a copy of the software release notice is available on NavCom’s Support
website.
This guide will step you through retuning the StarFire™ receiver to track changed satellite assignments for the
StarFire Network via NavCom’s StarUtil program.
Problem - StarFire signals have been reassigned by INMARSAT as a result of circumstances impacting
INMARSAT’s business. As a result, some of the StarFire signals have moved to different satellites and all of
the signals have been assigned new frequencies. The changes and effective dates are shown in Table 1
below. However, these are subject to change as of this writing and a similar update will be provided should a
change be realized.
Resolution – Update the receiver to the current release, as defined in the table above. Current products updated
with the new firmware (version v3.0.12) will include an updated StarFire tracking table and an over-the-air
StarFire almanac feature which allows for automatic updating of the tracking table should any statellites or
almanac feature for frequency changes which might occur in the future. This feature, the added capability of
GLONASS in StarFire, the accuracy improvements to <5cm and futher planned improvements (don’t aske, we
can’t tell) are all good reasons to consider upgrading from the discontinued products to the current products.
The new software table was increased to handle up to 20 StarFire satellites. New software for discontinued
products contains an updated StarFire tracking table. The new software is available for download from an ftp
site. Requests for the ftp site link and/or additional information should be sent to our Customer Support
center.
Alternatively, follow the directions below to manually tune to the new frequency.
In addtion to changes shown in the table of Satellite Assignments below, we are continuing to provide a signal
on the 15.5W satellite which would create a 7 satellite constellation. Current products with the new v3.0.12
software will automatically add the new seventh satellite to the tracking table via the over-the-air StarFire
almanac. Discontinued products will require the reciever be manually tuned to track the new seventh satellite
should the end-user choose to use this satellite. Table 1 below is updated from the Jan ’12 Troubleshooting
Guide release to reflect the current system frequencies and status.
To allow time to respond to the changes, all new frequencies and satellites are currently on the air with an
overlap period of both the old and new signals available as shown in the table below. This overlap period will
not be extended.
Seitenansicht 0
1 2 3 4 5 6 ... 23 24

Inhaltsverzeichnis

Seite 1

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G i Release - March 12 This guide is updated to reflect the software from NavCom wh

Seite 2

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G x Release - March 12  View  D3  LBM Software v3.0 or Later and GPS Software

Seite 3

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xi Release - March 12 o Check Ack/Nak o Click OK  Set the Alternate S

Seite 4

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xii Release - March 12 o Click OK  View  D3 o After a few m

Seite 5

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xiii Release - March 12  View  B1 – Solution o dGPS mode: 11 RTG Dual

Seite 6

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xiv Release - March 12 SF-2110 – All versions Please follow the procedure below t

Seite 7

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xv Release - March 12  View  D3  LBD DSP Status  Check StarFire signal

Seite 8

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xvi Release - March 12 o Click OK  Set the Alternate Satel

Seite 9

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xvii Release - March 12  View  D3 o After a few minutes, the receiver should

Seite 10

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xviii Release - March 12  View  B1 – Solution o dGPS mode: 6 RTG Single

Seite 11

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xix Release - March 12 Sapphire, SF-3040, and SF-3050 – All versions Please follo

Seite 12

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G ii Release - March 12 Graphical representation of the new global footprint is p

Seite 13

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xx Release - March 12  Detailed Views  StarFire o Check StarFire signal C/N

Seite 14

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xxi Release - March 12  Define Satellite o Select Detailed Views  StarFire o

Seite 15

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xxii Release - March 12 o Click Save

Seite 16

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xxiii Release - March 12  Set the Alternate Satellite o Select Receiver  Setu

Seite 17

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G xxiv Release - March 12  Check StarFire signal C/No Value which should be above

Seite 18 -  View  B1 – Solution

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G iii Release - March 12 IF the new software identified in Table 2 is installed, t

Seite 19

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G iv Release - March 12  Select Receiver  Messages  NCT output from the menu ba

Seite 20

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G v Release - March 12  View  D3 o LBM Software v1.5 or Earlier and GPS Softwar

Seite 21

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G vi Release - March 12 o Check Use Alternate Channel o Check Ack/Nak

Seite 22

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G vii Release - March 12  View  B1 – Solution o dGPS mode: 11 RTG Dual

Seite 23

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G viii Release - March 12 LBM v3.0 and later Please follow the procedure below to m

Seite 24

Troubleshooting Guide – StarFire™ Satellite Changes Mar ‘12 Rev. G ix Release - March 12  Select Receiver  Messages  NCT output from the menu ba

Kommentare zu diesen Handbüchern

Keine Kommentare